z6com时凯集团

    Collection and preservation of eDNA from marine water samples

    Ana Ramón-Laca, Abigail Wells, Linda Park

    Published: 2021-09-10 DOI: 10.17504/protocols.io.bx4upqww
    AI 解读
    浏览 1636

    Disclaimer

    DISCLAIMER – FOR INFORMATIONAL PURPOSES ONLY; USE AT YOUR OWN RISK

    The protocol content here is for informational purposes only and does not constitute legal, medical, clinical, or safety advice, or otherwise; content added to protocols.io is not peer reviewed and may not have undergone a formal approval of any kind. Information presented in this protocol should not substitute for independent professional judgment, advice, diagnosis, or treatment. Any action you take or refrain from taking using or relying upon the information presented here is strictly at your own risk. You agree that neither the Company nor any of the authors, contributors, administrators, or anyone else associated with protocols.io, can be held responsible for your use of the information contained in or linked to this protocol or any of our Sites/Apps and Services.

    Abstract

    This protocol is designed for water collection from Niskin bottles and filtration at sea using reusable filter cups.

    Aim: to collect and filter 2.5 L of water at each depth from each CTD cast and preserved the filter at room temperature in lysis buffer

    Steps

    Filter cups cleaning and assemblage

    1.

    Set up wash station (two buckets, one with 0.5% bleach, one with clean distilled H2O)

    Note
    Replace bleach and water stations at regular intervals (at least every other day, 0.5% bleach = 1.2L bleach in 20L bucket)

    2.

    Place all used small items in a small mesh bag and the filter cups in a large mesh bag in bleach for at least 0h 30m 0s

    3.

    Rinse the abovementioned items for at least 0h 10m 0s

    4.

    Allow to dry on the drying racks

    5.

    Wearing a fresh pair of gloves, mount filter cups with new sterile filter

    Collection of water from Niskin bottles

    6.

    Let the water from the hull (“surface water sample”) run for > 0h 3m 0s while the CTD is being deployed

    7.

    Collect 2 samples of2.5Leach of “surface water” for each CTD cast in 69oz whirlpack bags. Use pitchers for support and stability.

    8.

    Once the CTD rosette has been brought back to the surface, water needs to be extracted from each Niskin bottle and transported into the lab for filtration.

    We want to collect 2.5Lof water from each Niskin.

    Wipe the spigot on the Niskin with DNAway to remove potential contaminants on the outside of the Niskin

    9.

    Flush water (count to 10) from the Niskin to further reduce risk of contamination and collect 2.5LL of water in a whirlpack bag and place in 2L pitcher

    10.

    Include a sampling negative control by collecting 2.5L of distilled H2O (at least daily)

    Filtration of water samples

    11.

    Wipe working area with DNAway. Use a clean absorbant pad each day for the filtration station.

    12.

    Switch on the pump and set vacuum in the middle range between-8 and -12 bars (keep an eye on the gauge & adjust if necessary)

    13.

    Pour water from whirlpack bag (supported by pitcher) into the filter cup, repeat until finished (2.5L of water)

    14.

    Using DNA-free forceps fold filter and place in pre-labeled tube pre-filled with preservative buffer (2mL, Longmire Buffer in a 5 ml LoBind tube).

    Longmire lysis buffer

    15.

    Filter 2.5L of ship distilled H2O every time the cleaning distilled H2O is replaced as a sampling negative control

    16.

    Every 2-3 days 2L of lab diH2O should be filtered as sampling negative controls

    17.

    Note tube label in notes. Also note time filtered, membrane type, place filtered (field/lab, which lab), etc.

    18.

    Store samples at room temperature away from UV light

    推荐阅读

    Nature Protocols
    Protocols IO
    Current Protocols
    扫码咨询